WMB 51221 S
WMB 51221 W
WMB 51021 W
Washing Machine
User's Manual
Document Number
2820522883/ 18-04-12.(8:20)
TABLE OF CONTENTS
1 Important instructions for safety and
environment
5 Operating the product
19
4
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .19
5.2 Preparing the machine . . . . . . . . . . . . . . . .20
5.3 Programme selection . . . . . . . . . . . . . . . . .20
5.4 Main programmes . . . . . . . . . . . . . . . . . . .20
5.5 Additional programmes . . . . . . . . . . . . . . .20
5.6 Special programmes. . . . . . . . . . . . . . . . . .21
5.7 Temperature selection. . . . . . . . . . . . . . . . .21
5.8 Spin speed selection. . . . . . . . . . . . . . . . . .21
5.9 Programme and consumption table. . . . . . .22
5.10 Auxiliary function selection . . . . . . . . . . . .23
5.11 Starting the programme . . . . . . . . . . . . . .24
5.12 Child Lock . . . . . . . . . . . . . . . . . . . . . . . .24
5.13 Progress of programme . . . . . . . . . . . . . .25
5.14 Loading door lock. . . . . . . . . . . . . . . . . . .25
5.15 Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . . .25
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .4
1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5
1.4 Package information. . . . . . . . . . . . . . . . . . .5
1.5 Disposing of the waste product . . . . . . . . . . .5
1.6 Compliance with WEEE Directive . . . . . . . . . .5
2 Your washing machine
6
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.2 Package Contents . . . . . . . . . . . . . . . . . . . .7
2.3 Technical specifications . . . . . . . . . . . . . . . .8
3 Installation
9
3.1 Appropriate installation location. . . . . . . . . . .9
3.2 Removing packaging reinforcement . . . . . . .9
3.3 Removing the transportation locks. . . . . . . . .9
3.4 Connecting water supply. . . . . . . . . . . . . . .10
3.5 Connecting to the drain. . . . . . . . . . . . . . . .10
3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . .11
3.7 Electrical connection. . . . . . . . . . . . . . . . . .11
5.16 Canceling the programme. . . . . . . . . . . . .25
6 Quick User Guide
26
6.1 Preparing the machine . . . . . . . . . . . . . . . .26
6.2 Programme selection . . . . . . . . . . . . . . . . .26
6.3 Auxiliary function selection . . . . . . . . . . . . .26
6.4 Starting the programme . . . . . . . . . . . . . . .26
6.5 Canceling the programme. . . . . . . . . . . . . .26
4 Preparation
13
4.1 Sorting the laundry. . . . . . . . . . . . . . . . . . .13
4.2 Preparing laundry for washing. . . . . . . . . . .14
4.3 Things to be done for energy saving . . . . . .14
4.4 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . .15
4.5 Correct load capacity . . . . . . . . . . . . . . . . .15
4.6 Loading the laundry . . . . . . . . . . . . . . . . . .15
4.7 Using detergent and softener . . . . . . . . . . .16
4.8 Tips for efficient washing . . . . . . . . . . . . . .18
7 Maintenance and cleaning
27
7.1 Cleaning the detergent drawer . . . . . . . . . .27
7.2 Cleaning the loading door and the drum . . .27
7.3 Cleaning the body and control panel . . . . . .28
7.4 Cleaning the water intake filters . . . . . . . . .28
7.5 Draining remaining water and cleaning the
pump filter. . . . . . . . . . . . . . . . . . . . . . . .28
8 Troubleshooting
30
Washing Machine / User‘s Manual
3 / 36 EN
1 Important instructions for safety and environment
This section contains safety instructions that will
• Unplug the product when not in use.
help protect from risk of personal injury or property • Never wash the product by spreading or pouring
damage. Failure to follow these instructions shall
void any warranty.
water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands! Never
unplug by pulling on the cable, always pull out
by grabbing the plug.
• Use detergents, softeners and supplements
suitable for automatic washing machines only.
• Follow the instructions on the textile tags and on
the detergent package.
1.1 General safety
• This product can be used by children at and
above 8 years old and by persons whose
physical, sensory or mental capabilities were
not fully developed or who lack experience and
knowledge provided that they are supervised or
trained on the safe usage of the product and the
risks it brings out. Children must not play with
the product. Cleaning and maintenance works
should not be performed by children unless they
are supervised by someone.
• The product must be unplugged during
installation, maintenance, cleaning and repairing
procedures.
• Always have the installation and repairing
procedures carried out by the Authorized
Service Agent. Manufacturer shall not be
held liable for damages that may arise from
procedures carried out by unauthorized persons.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similary qualified persons in order to avoid a
hazard.
• If the power cable is damaged, it must be
replaced by the manufacturer, after sales service
or a similarly qualified person (preferably an
electrician) or someone designated by the
importer in order to avoid possible risks.
• Never place the product on a carpet-covered
floor. Otherwise, lack of airflow beneath the
machine will cause electrical parts to overheat.
This will cause problems with your product.
• If the product has a failure, it should not be
operated unless it is repaired by the Authorized
Service Agent. There is the risk of electric shock!
• This product is designed to resume operating
in the event of powering on after a power
interruption. If you wish to cancel the
programme, see "Cancelling the programme"
section.
1.2 Intended use
• Connect the product to a grounded outlet
protected by a 16 A fuse. Do not neglect to have
the grounding installation made by a qualified
electrician. Our company shall not be liable for
any damages that will arise when the product is
used without grounding in accordance with the
local regulations.
• The water supply and draining hoses must be
securely fastened and remain undamaged.
Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter
while there is still water in the drum. Otherwise,
risk of flooding and injury from hot water will
occur.
• This product has been designed for domestic
use. It is not suitable for commercial use and it
must not be used out of its intended use.
• The product must only be used for washing and
rinsing of laundry that are marked accordingly.
• The manufacturer waives any responsibility
arisen from incorrect usage or transportation.
• The service life of your product is 10 years.
During this period, original spare parts will be
available to operate the appliance properly.
• Do not force open the locked loading door.
The loading door will be ready to open just a
few minutes after the washing cycle comes to
an end. In case of forcing the loading door to
open, the door and the lock mechanism may get
damaged.
Washing Machine / User‘s Manual
4 / 36 EN
Important instructions for safety and environment
1.3 Children's safety
1.6 Compliance with WEEE Directive
• Packaging materials are dangerous to children.
Keep packaging materials in a safe place away
from reach of the children.
This appliance’s packaging material is
recyclable. Help recycle it and protect
the environment by dropping it off in
• Electrical products are dangerous for the
children. Keep children away from the product
when it is in use. Do not let them to tamper with
the product. Use child lock to prevent children
from intervening with the product.
• Do not forget to close the loading door when
leaving the room where the product is located.
the municipal receptacles provided for
this purpose. Your appliance also
contains a great amount of recyclable
material. It is marked with this label to indicate the
used appliances that should not be mixed with
other waste. This way, the appliance recycling
organised by your manufacturer will be done under
• Store all detergents and additives in a safe place the best possible conditions, in compliance with
away from the reach of the children by closing
the cover of the detergent container or sealing
the detergent package.
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment. Contact your
town hall or your retailer for the used appliance
collection points closest to your home. We thank
you doing your part to protect the environment.
1.4 Package information
• Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the packaging
materials together with the domestic or other
wastes. Take them to the packaging material
collection points designated by the local
authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high
quality parts and materials which can be reused
and are suitable for recycling. Therefore, do
not dispose the product with normal domestic
waste at the end of its service life. Take it to a
collection point for the recycling of electrical
and electronic equipment. Please consult your
local authorities to learn the nearest collection
point. Help protect the environment and natural
resources by recycling used products. For
children's safety, cut the power cable and break
the locking mechanism of the loading door so
that it will be non-functional before disposing of
the product.
Washing Machine / User‘s Manual
5 / 36 EN
2 Your washing machine
2.1 Overview
8
1
2
3
7
6
4
5
1- Power cable
2- Top panel
3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door
7- Detergent drawer
8- Drain hose
Washing Machine / User‘s Manual
6 / 36 EN
Your washing machine
2.2 Package Contents
3
4
2
1
a
b
c
6
7
5
1- Power cable
2- Drain hose
3- Transportation safety bolts *
4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.)
a- Electronical water shut-off
a- Mechanical water shut-off
c- Standard
5- Liquid detergent container**
6- User Manual
7- Blind plug***
*
Number of transportation safety bolts may change depending on the model of your machine.
** This may be supplied with the machine depending on the model of your machine.
*** This is supplied if your machine is equipped with double water inlet.
Washing Machine / User‘s Manual
7 / 36 EN
Your washing machine
2.3 Technical specifications
WMB51221S
WMB51221W
WMB51021W
Models (EN)
5
5
5
Maximum dry laundry capacity (kg)
Height (cm)
84
60
84
60
84
60
Width (cm)
Depth (cm)
45
62
45
62
45
59
Net weight ( 4 kg.)
Electrical input (V/Hz)
Total current (A)
230 V / 50Hz
230 V / 50Hz
230 V / 50Hz
10
10
10
Total power (W)
2200
1200
1.35
0.25
929
2200
1200
1.35
0.25
929
2200
1000
1.35
0.25
929
Spin speed (rpm max.)
Stand-by mode power (W)
Off-mode power (W)
Main model code
Single Water inlet / Double Water inlet
• / -
• / -
• / -
• Available
Technical specifications may be changed without prior notice to improve the quality of the product.
Figures in this manual are schematic and may not match the product exactly.
C
C
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory
conditions in accordance with the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
C
Washing Machine / User‘s Manual
8 / 36 EN
3 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product
ready for use, review the information in the user
manual and make sure that the electricity, tap
water supply and water drainage systems are
appropriate before calling the Authorized Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
3.2 Removing packaging
reinforcement
Tilt the machine backwards to remove the
packaging reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Preparation of the location and electrical,
tap water and waste water installations
at the place of installation is under
customer's responsibility.
C
WARNING: Installation and electrical
connections of the product must be carried
B out by the Authorized Service Agent.
Manufacturer shall not be held liable for
damages that may arise from procedures
carried out by unauthorized persons.
3.3 Removing the transportation locks
WARNING: Prior to installation, visually
check if the product has any defects on
A it. If so, do not have it installed. Damaged
WARNING: Do not remove the
transportation locks before taking out the
A packaging reinforcement.
products cause risks for your safety.
WARNING: Remove the transportation
safety bolts before operating the washing
Make sure that the water inlet and
discharge hoses as well as the power
A machine! Otherwise, the product will be
1.Loosen all the bolts with a suitable spanner until
cable are not folded, pinched or crushed
C
damaged.
while pushing the product into its place
after installation or cleaning procedures.
they rotate freely (C).
3.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place
it on a long pile rug or similar surfaces.
• Total weight of the washing machine and the
dryer -with full load- when they are placed
on top of each other reaches to approx. 180
kilograms. Place the product on a solid and flat
floor that has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where
temperature may fall below 0ºC.
2.Remove transportation safety bolts by turning
them gently.
• Place the product at least 1 cm away from the
edges of other furniture.
Washing Machine / User‘s Manual
9 / 36 EN
Installation
3.Attach the plastic covers supplied in the User
Manual bag into the holes on the rear panel. (P)
WARNING: Ensure that the cold and hot
water connections are made correctly when
A installing the product. Otherwise, your
laundry will come out hot at the end of the
washing process and wear out.
2.Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
Keep the transportation safety bolts in
a safe place to reuse when the washing
machine needs to be moved again in the
future.
C
Never move the product without the
transportation safety bolts properly fixed
in place!
C
3.Open the taps completely after making the
hose connection to check for water leaks at
the connection points. If any leaks occur, turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
water leakages and damages caused by them,
keep the taps closed when the machine is not in
use.
3.4 Connecting water supply
The water supply pressure required to run
the product is between 1 to 10 bars (0.1 –
10 MPa). It is necessary to have 10 – 80
liters of water flowing from the fully open
tap in one minute to have your machine run
smoothly. Attach a pressure reducing valve if
water pressure is higher.
C
If you are going to use the double water-
inlet product as a single (cold) water-inlet
unit, you must install the supplied stopper
to the hot water valve before operating the
product. (Applies for the products supplied
with a blind stopper group.)
3.5 Connecting to the drain
• The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
C
WARNING: Your house will be flooded
if the hose comes out of its housing
WARNING: Models with a single water
inlet should not be connected to the hot
A water tap. In such a case the laundry will
get damaged or the product will switch to
protection mode and will not operate.
A during water discharge. Moreover, there
is risk of scalding due to high washing
temperatures! To prevent such situations
and to ensure smooth water intake and
discharge of the machine, fix the end
of the discharge hose tightly so that it
cannot come out.
WARNING: Do not use old or used water
inlet hoses on the new product. It may cause
A stains on your laundry.
• The hose should be attached to a height of at
least 40 cm, and 100 cm at most.
1.Connect the special hoses supplied with the
product to the water inlets on the product. Red
hose (left) (max. 90 ºC) is for hot water inlet,
blue hose (right) (max. 25 ºC) is for cold water
inlet.
• In case the hose is elevated after laying it on
the floor level or close to the ground (less than
40 cm above the ground), water discharge
becomes more difficult and the laundry may
come out excessively wet. Therefore, follow the
heights described in the figure.
Washing Machine / User‘s Manual
10 / 36 EN
Installation
1.Loosen the lock nuts on the feet by hand.
2.Adjust the feet until the product stands level and
balanced.
• To prevent flowing of dirty water back into the
machine and to allow for easy discharge, do not
immerse the hose end into the dirty water or do
not drive it in the drain more than 15 cm. If it is
too long, cut it short.
• The end of the hose should not be bent, it
should not be stepped on and the hose must not
be pinched between the drain and the machine.
• If the length of the hose is too short, use it by
adding an original extension hose. Length of the
hose may not be longer than 3.2 m. To avoid
water leak failures, the connection between
the extension hose and the drain hose of the
product must be fitted well with an appropriate
clamp as not to come off and leak.
3.Tighten all lock nuts again by hand.
WARNING: Do not use any tools to
loosen the lock nuts. Otherwise, they will
A get damaged.
3.6 Adjusting the feet
WARNING: In order to ensure that
3.7 Electrical connection
Connect the product to a grounded outlet
protected by a 13 A fuse. Our company shall not
be liable for any damages that will arise when the
product is used without grounding in accordance
with the local regulations.
the product operates more silently and
A vibration-free, it must stand level and
balanced on its feet. Balance the machine
by adjusting the feet. Otherwise, the
product may move from its place and
cause crushing and vibration problems.
• Connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• If the current value of the fuse or breaker in the
house is less than 13 Amps, have a qualified
electrician install a 13 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
WARNING: Damaged power cables
must be replaced by the Authorized
B Service Agents.
Washing Machine / User‘s Manual
11 / 36 EN
Installation
Electrical requirements
Important
Before you insert the plug into the wall socket
make sure that the voltage and the frequency
shown in the rating label corresponds to your
electricity supply.
We recommend that this appliance be connected
to the mains supply via a suitable switched and
fused socket in a readily accessible position.
Should the mains lead of the appliance become
damaged or need replacing at any time, it must
be replaced by a special purpose made mains
lead which can only be obtained from a Authorised
Service Agent.
Fitting a different plug
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals on
your plug, proceed as follows:
1 Connect the green - yellow or green (earth) wire
to the terminal in the plug marked ‘E’ or with the
symbol f or coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in
the plug marked ‘N’ or coloured black.
3 Connect the brown (live) wire to the terminal in
the plug marked ‘L’ or coloured red.
With the alternative plugs a 13A fuse must be fitted
either in the plug or adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
WARNING: This appliance must be
earthed
B
If the fitted moulded plug is not suitable for your
socket, then the plug should be cut off and an
appropriate plug fitted.
Destroy the old plug, which is cut off as a plug
with a bared cord could cause a shock hazard if
inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a
13A fuse. Should the fuse need to be replaced an
ASTA approved BS1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the plug must
not be used until a replacement fuse cover has
been fitted. Colour of the replacement fuse cover
must be the same colour as that visible on the pin
face of the plug. Fuse covers are available from
any good electrical store.
Transportation of the product
1.Unplug the product before transporting it.
2.Remove water drain and water supply
connections.
3.Drain all water that has remained in the product.
See 7.5
4.Install transportation safety bolts in the reverse
order of removal procedure; see 3.3.
Never move the product without the
transportation safety bolts properly fixed
in place!
C
A materials in a safe place away from reach
WARNING: Packaging materials are
dangerous to children. Keep packaging
of the children.
Washing Machine / User‘s Manual
12 / 36 EN
4 Preparation
4.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
• Always obey the instructions given on the garment tags.
LAUNDRY WASH SYMBOLS
Machine
Wash
Symbols
WASH
950C
700C
600C
500C 400C
300C
Maximum
Symbol(s)
Water
Temperatures
lll
lll
lll
l l
ll
ll
lll
ll
l
Drying
Symbols
Suitable for
dryer
No Iron
Do not dry-
clean
Sensitive /
Delicate dry
Do not dry
with dryer
Do not dry
DRYING
Drying
Settings
Iron -
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
Dry or Steam
IRON
200 0C
150 0C
110 0C
Maximum temperature
Bleach (sodium
hypochlorite)
can be used
Bleach is not
allowed
Only bleaches without
chlorine are allowed
All bleaches are allowed
BLEACH
Washing Machine / User‘s Manual
13 / 36 EN
Preparation
4.2 Preparing laundry for washing
• Laundry items with metal attachments such as,
underwired bras, belt buckles or metal buttons
will damage the machine. Remove the metal
pieces or wash the clothes by putting them in a
laundry bag or pillow case.
• Take out all substances in the pockets such as
coins, pens and paper clips, and turn pockets
inside out and brush. Such objects may damage
the product or cause noise problem.
• Put small size clothes such as infant's socks
and nylon stockings in a laundry bag or pillow
case.
• Place curtains in without compressing them.
Remove curtain attachment items.
• Fasten zippers, sew loose buttons and mend
rips and tears.
• Wash “machine washable” or “hand washable”
labeled products only with an appropriate
programme.
• Do not wash colours and whites together. New,
dark coloured cottons release a lot of dye. Wash
them separately.
4.3 Things to be done
for energy saving
Following information will help you use the product
in an ecological and energy-efficient manner.
• Operate the product in the highest capacity
allowed by the programme you have selected,
but do not overload; see, "Programme and
consumption table".
• Always follow the instructions on the detergent
packaging.
• Wash slightly soiled laundry at low
temperatures.
• Use faster programmes for small quantities of
lightly soiled laundry.
• Do not use prewash and high temperatures for
laundry that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select
the highest spin speed recommended during
washing process.
• Do not use detergent in excess of the amount
recommended on the detergent package.
• Tough stains must be treated properly before
washing. If unsure, check with a dry cleaner.
• Use only dyes/colour changers and limescale
removers suitable for machine wash. Always
follow the instructions on the package.
• Wash trousers and delicate laundry turned
inside out.
• Keep laundry items made of Angora wool in the
freezer for a few hours before washing. This will
reduce pilling.
• Laundry that are subjected to materials such as
flour, lime dust, milk powder, etc. intensely must
be shaken off before placing into the machine.
Such dusts and powders on the laundry may
build up on the inner parts of the machine in
time and can cause damage.
Washing Machine / User‘s Manual
14 / 36 EN
Preparation
4.4 Initial use
4.5 Correct load capacity
The maximum load capacity depends on the type
of laundry, the degree of soiling and the washing
programme desired.
The machine automatically adjusts the amount
of water according to the weight of the loaded
laundry.
Before starting to use the product, make sure
that all preparations are made in accordance
with the instructions in sections “Important safety
instructions” and “Installation”.
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If your product is not equipped with
Drum Cleaning programme, perform the Initial
Use procedure in accordance with the methods
described under “7.2 Cleaning the loading door
and the drum” section of the user manual.
WARNING: Follow the information in
the “Programme and consumption table”.
A When overloaded, machine's washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry type
Bathrobe
Napkin
Weight (g)
1200
100
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
700
500
200
250
200
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pajamas
Blouses
100
200
100
600
200
500
100
Use an anti-limescale suitable for the
washing machines.
C
C
Some water might have remained in
the product due to the quality control
processes in the production. It is not
harmful for the product.
4.6 Loading the laundry
1.Open the loading door.
2.Place laundry items loosely into the machine.
3.Push the loading door to close until you hear a
locking sound. Ensure that no items are caught
in the door.
The loading door is locked while a
programme is running. The door can only
be opened a while after the programme
comes to an end.
C
WARNING: In case of misplacing the
laundry, noise and vibration problems may
A occur in the machine.
Washing Machine / User‘s Manual
15 / 36 EN
Preparation
Choosing the detergent type
The type of detergent to be used depends on the
type and colour of the fabric.
• Use different detergents for coloured and white
laundry.
• Wash your delicate clothes only with special
detergents (liquid detergent, wool shampoo,
etc.) used solely for delicate clothes.
• When washing dark coloured clothes and quilts,
it is recommended to use liquid detergent.
• Wash woolens with special detergent made
specifically for woolens.
4.7 Using detergent and softener
When using detergent, softener, starch,
fabric dye, bleach or limescale remover
read the manufacturer's instructions on the
C
package carefully and follow the suggested
dosage values. Use measuring cup if
available.
Detergent Drawer
The detergent drawer is composed of three
compartments:
– (1) for prewash
– (2) for main wash
– (3) for softener
– (*) in addition, there is siphon piece in the
softener compartment.
WARNING: Use only detergents
manufactured specifically for washing
A machines.
3
1
WARNING: Do not use soap powder.
2
A
Adjusting detergent amount
The amount of washing detergent to be used
depends on the amount of laundry, the degree of
soiling and water hardness.
• Do not use amounts exceeding the dosage
quantities recommended on the detergent
package to avoid problems of excessive foam,
poor rinsing, financial savings and finally,
environmental protection.
Detergent, softener and other cleaning agents
• Add detergent and softener before starting the
washing programme.
• Never leave the detergent drawer open while the • Use lesser detergent for small amounts or lightly
washing programme is running!
soiled clothes.
Using softeners
Pour the softener into the softener compartment of
the detergent drawer.
• When using a programme without prewash,
do not put any detergent into the prewash
compartment (compartment nr. "1").
• In a programme with prewash, do not put
liquid detergent into the prewash compartment
(compartment nr. "1").
• Do not select a programme with prewash if you
are using a detergent bag or dispensing ball.
Place the detergent bag or the dispensing ball
directly among the laundry in the machine.
• If you are using liquid detergent, do not forget
to place the liquid detergent cup into the main
wash compartment (compartment nr. "2").
• Do not exceed the (>max<) level marking in the
softener compartment.
• If the softener has lost its fluidity, dilute it with
water before putting it in the detergent drawer.
Washing Machine / User‘s Manual
16 / 36 EN
Preparation
Using liquid detergents
Using starch
If the product contains a liquid detergent cup: • Add liquid starch, powder starch or the fabric
dye into the softener compartment.
• Do not use softener and starch together in a
washing cycle.
• Wipe the inside of the machine with a damp and
clean cloth after using starch.
• Make sure that you have placed the liquid
detergent cup in compartment nr. "2".
• If the liquid detergent has lost its fluidity, dilute it
with water before putting in the detergent cup.
Using bleaches
• Select a programme with prewash and add
the bleaching agent at the beginning of the
prewash. Do not put detergent in the prewash
compartment. As an alternative application,
select a programme with extra rinse and add
the bleaching agent while the machine is taking
water from the detergent compartment during
first rinsing step.
• Do not use bleaching agent and detergent by
mixing them.
• Use just a little amount (approx. 50 ml) of
bleaching agent and rinse the clothes very
well as it causes skin irritation. Do not pour the
bleaching agent onto the clothes and do not use
it for coloured clothes.
• When using oxygen based bleaches, select a
programme that washes at a lower temperature.
• Oxygen based bleaches can be used together
with detergents; however, if its thickness
is not the same with the detergent, put the
detergent first into the compartment nr. "2"
in the detergent drawer and wait until the
detergent flows while the machine is taking in
water. Add the bleaching agent from the same
compartment while the machine is still taking in
water.
If the product does not contain a liquid
detergent cup:
• Do not use liquid detergent for the prewash in a
programme with prewash.
• Liquid detergent stains your clothes when used
with Delayed Start function. If you are going to
use the Delayed Start function, do not use liquid
detergent.
Using gel and tablet detergent
Apply the following instructions when using tablet,
gel and similar detergents.
• If the gel detergent thickness is fluidal and
your machine does not contain a special liquid
detergent cup, put the gel detergent into the
main wash detergent compartment during first
water intake. If your machine contains a liquid
detergent cup, fill the detergent into this cup
before starting the programme.
• If the gel detergent thickness is not fluidal or in
the shape of capsule liquid tablet, put it directly
into the drum before washing.
Using limescale remover
• Put tablet detergents into the main wash
compartment (compartment nr. "2") or directly
into the drum before washing.
• When required, use limescale removers
manufactured specifically for washing machines
only.
Tablet detergents may leave residues
in the detergent compartment. If you
encounter such a case, place the tablet
C
detergent between the laundry, close
to the lower part of the drum in future
washings.
Use the tablet or gel detergent without
selecting the prewash function.
C
Washing Machine / User‘s Manual
17 / 36 EN
Preparation
4.8 Tips for efficient washing
Clothes
Light colours and
whites
Delicates/Woolens/
Silks
Colours
Dark colours
(Recommended
temperature range
based on soiling level:
40-90ºC)
(Recommended
(Recommended
(Recommended
temperature range based
on soiling level: cold-40ºC)
temperature range temperature range
based on soiling
level: cold-40ºC)
based on soiling level:
cold-30ºC)
It may be necessary
to pre-treat the
stains or perform
prewash. Powder
and liquid detergents
recommended for whites
can be used at dosages
recommended for
heavily soiled clothes. It
is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches.
Powder and liquid
detergents recommended
for colours can be used at
dosages recommended
for heavily soiled clothes.
It is recommended to use
powder detergents to
Liquid detergents
suitable for
Prefer liquid
Heavily Soiled
detergents produced
for delicate clothes.
Woolen and silk
colours and dark
colours can be
used at dosages
recommended
for heavily soiled
clothes.
(difficult stains
such as grass,
coffee, fruits and
blood.)
clothes must be
washed with special
woolen detergents.
clean clay and soil stains
and the stains that are
sensitive to bleaches. Use
detergents without bleach.
Liquid detergents
suitable for
Powder and liquid
Prefer liquid
Powder and
Normally Soiled
detergents recommended
for colours can be used at
dosages recommended
for normally soiled clothes.
Use detergents without
bleach.
detergents produced
for delicate clothes.
Woolen and silk
liquid detergents
colours and dark
colours can be
used at dosages
recommended for
normally soiled
clothes.
recommended for whites
can be used at dosages
recommended for
(For example,
stains caused by
body on collars
and cuffs)
clothes must be
washed with special
woolen detergents.
normally soiled clothes.
Liquid detergents
suitable for
Powder and liquid
Prefer liquid
Powder and
detergents recommended
for colours can be used at
dosages recommended
for lightly soiled clothes.
Use detergents without
bleach.
detergents produced
for delicate clothes.
Woolen and silk
liquid detergents
colours and dark
colours can be
used at dosages
recommended
for lightly soiled
clothes.
Lightly Soiled
recommended for whites
can be used at dosages
recommended for lightly
soiled clothes.
(No visible stains
exist.)
clothes must be
washed with special
woolen detergents.
Washing Machine / User‘s Manual
18 / 36 EN
5 Operating the product
5.1 Control panel
1
2
7
3
4
5
6
1 - Programme Selection knob (Uppermost
position On/Off)
2 - Programme Follow-up indicator
3 - Temperature Adjustment button
4 - Spin Speed adjustment button
5 - Auxiliary Function buttons
6 - Delayed Start button (in some models)
7 - Start / Pause button
Washing Machine / User‘s Manual
19 / 36 EN
Operating the product
• Synthetics
5.2 Preparing the machine
1.Make sure that the hoses are connected tightly.
2.Plug in your machine.
3.Turn the tap on completely.
4.Place the laundry in the machine.
5.Add detergent and fabric softener.
Use this programme to wash your synthetic
clothes (shirts, blouses, synthetic/cotton blends,
etc.). It washes with a gentle action and has a
shorter washing cycle compared to the Cottons
programme.
For curtains and tulle, use the Synthetic 40˚C
programme with prewash and anti-creasing
functions selected. As their meshed texture causes
excessive foaming, wash the veils/tulle by putting
little amount of detergent into the main wash
compartment. Do not put detergent in the prewash
compartment.
5.3 Programme selection
1.Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the "Programme and
consumption table" and the temperature table
below.
Heavily soiled white cottons and linens.
(coffee table covers, tableclothes, towels,
bed sheets, etc.)
• Woollens
90˚C
Use this programme to wash your woolen clothes.
Select the appropriate temperature complying
with the tags of your clothes. Use appropriate
detergents for woolens.
Normally soiled, coloured, fade proof
linens, cottons or synthetic clothes (shirt,
nightgown, pajamas, etc.) and lightly soiled
white linens (underwear, etc.)
60˚C
5.5 Additional programmes
For special cases, additional programmes are
available in the machine.
40˚C-
30˚C-
Cold
Blended laundry including delicate textile
(veil curtains, etc.), synthetics and woolens.
Additional programmes may differ
according to the model of the machine.
C
2.Select the desired programme with the
Programme Selection button.
• Cottons Eco
Programmes are limited with the highest
spin speed appropriate for that particular
type of fabric.
When selecting a programme, always
consider the type of fabric, colour,
degree of soiling and permissible water
temperature.
Always select the lowest required
temperature. Higher temperature means
higher power consumption.
You may wash your normally soiled durable cotton
and linen laundry in this programme with the
highest energy and water saving compared to
all other wash programmes suitable for cottons.
Actual water temperature may differ from the
declared cycle temperature. Programme duration
may automatically be shortened during later stages
of the programme if you wash less amount (e.g. ½
capacity or less) of laundry. In this case energy and
water consumption will be further decreased giving
you the opportunity for a more economical wash.
This feature is available for certain models having
remaining time display.
C
C
C
C
For further programme details, see
"Programme and consumption table"
5.4 Main programmes
Depending on the type of fabric, use the following
main programmes.
• Baby&Toddler Clothing
Use this programme for baby clothes and clothes
worn by allergic people. Increased hygiene is
provided by a longer heating period and an
additional rinse cycle.
• Cottons
Use this programme for your cotton laundry (such
as bed sheets, duvet and pillowcase sets, towels,
bathrobes, underwear, etc.). Your laundry will be
washed with vigorous washing action for a longer
washing cycle.
Washing Machine / User‘s Manual
20 / 36 EN
Operating the product
• Hand Wash
5.7 Temperature selection
Use this programme to wash your woolen/delicate
clothes that bear “not machine- washable” tags
and for which hand wash is recommended. It
washes laundry with a very gentle washing action
to not to damage clothes.
Whenever a new programme is selected, the
recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature will
decrease gradually.
• Time Saver
Use this programme to wash your lightly soiled
cotton clothes in a short time.
If the programme has not reached
the heating step, you can change the
temperature without switching the
machine to Pause mode.
• Dark Care
C
Use this programme to wash your dark coloured
laundry, or the coloured laundry that you do not
want them get faded. Washing is performed with
less mechanical movements at low temperature.
It is recommended to use liquid detergent or wool
shampoo for dark coloured laundry.
5.8 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. See "Auxiliary function
selection" section for explanations of these
options.
• Mixed Fabrics
Use this programme to wash your cotton and
synthetic clothes together without sorting them.
5.6 Special programmes
For specific applications, select any of the
following programmes.
• Rinse
If the programme has not reached the
spinning step, you can change the speed
Use this programme when you want to rinse or
starch separately.
• Spin+Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in the
machine.
without switching the machine to Pause
mode.
C
Before selecting this programme, select the
desired spin speed and press Start / Pause button.
First, the machine will drain the water inside of
it. Then, it will spin the laundry with the set spin
speed and drain the water coming out of them.
If you wish to drain only the water without spinning
your laundry, select the Pump+Spin programme
and then select the No Spin function with the help
of Spin Speed Adjustment button. Press Start /
Pause button.
Use a lower spin speed for delicate
laundries.
C
Washing Machine / User‘s Manual
21 / 36 EN
Operating the product
5.9 Programme and consumption table
EN
Auxiliary functions
2
Selectable
temperature range
°C
Programme
Cottons
90
60
5
5
147
118
98
66
66
66
37
30
30
55
55
55
58
45
30
40
85
45
45
2.25
1.45
0.85
0.74
0.69
0.61
1.90
1.00
0.20
0.45
0.50
0.15
0.30
1.90
0.90
0.42
1600
1600
1600
1600
1600
1600
1400
1400
1400
800
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cold-90
Cold-90
Cold-90
40-60
Cottons
Cottons
40
5
Cottons Eco
Cottons Eco
Cottons Eco
Time Saver
Time Saver
Time Saver
Dark Care
60**
60**
40**
90
5
159
129
129
88
2.5
2.5
5
40-60
40-60
•
•
•
*
Cold-90
Cold-90
Cold-90
Cold-40
Cold-40
Cold-30
Cold-40
30-90
60
5
58
30
5
28
40
2.5
3
107
115
43
Mixed Fabrics
Hand Wash
Woollens
40
800
•
•
•
•
30
1
600
40
1.5
5
60
600
•
*
•
•
•
•
Baby&Toddler Clothing
Synthetics
90
165
116
106
1600
800
•
•
•
60
2.5
2.5
•
•
•
•
•
•
Cold-60
Cold-60
Synthetics
40
800
• Selectable
* Automatically selected, no canceling.
** Energy Label programme (EN 60456 Ed.3)
** “Cotton eco 40°C and Cotton eco 60°C are the standard programmes.” These programmes are referred to as
‘standard 40°C cotton programme’ and ‘standard 60°C cotton programme’
*** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin
speed.
The auxiliary functions in the table may vary according to the model of your machine.
C
C
Water and power consumption may vary subject to the changes in water pressure, water hardness and
temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and
spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is
normal that small differences may occur between the time shown on the display and the real washing
time.
C
Washing Machine / User‘s Manual
22 / 36 EN
Operating the product
• Rinse Plus
5.10 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected
by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced and
spinning speed is limited to prevent creasing. In
addition, washing is done with a higher water level.
Use this function for delicate laundry that creases
easily.
Some functions cannot be selected
together. If a second auxiliary function
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
conflicting with the first one is selected
C
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want to
select Quick Wash after you have selected
the Prewash, Prewash will be canceled
and Quick Wash will remain active.
An auxiliary function that is not
compatible with the programme cannot
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
Delayed Start (In some models only)
be selected. (See “Programme and
consumption table”)
C
C
Auxiliary Function buttons may vary
according to the model of the machine.
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
Do not use liquid detergents when you set
Delayed Start! There is the risk of staining
of the clothes.
C
Prewash without detergent is
recommended for tulle and curtains.
C
1.Open the loading door, place the laundry and put
detergent, etc.
2.Select the washing programme, temperature,
spin speed and, if required, the auxiliary
functions.
• Quicker Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for
lightly soiled laundry.
3.Set the desired time by pressing the Delayed
Start button. When the button is pressed once,
3 hours delayed start is selected. When the
same button is pressed again, 6 hours delay is
selected, and when it is pressed for the third
time, 9 hours delayed start is selected. If you
press the Delayed Start button once again,
Delayed Start function will be canceled.
When you select this function, load
your machine with half of the maximum
laundry specified in the programme table.
C
Washing Machine / User‘s Manual
23 / 36 EN
Operating the product
4. Press Start / Pause button. Previous delayed
start time light turns off and next delayed start
time light turns on after every 3 hours.
5.At the end of the countdown, all delayed start
lights will turn off and the selected programme
will start.
5.12 Child Lock
Use child lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
If the Programme Selection knob is
turned when the Child Lock is active,
“Con” appears on the display. The
C
Additional laundry may be loaded during
the delayed start period.
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue
running.
C
Changing the Delayed Start period
Press Delayed Start button. Every time the button
is pressed, the period will change in 3-hour
increments and the light of the selected delayed
start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
1.Set the Delayed Start period to zero (all delayed
start period lights will turn off) or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously.
2.Then, select the programme you want to run
again.
C
When the Child Lock is active and the
machine is running, you can switch
the machine to Pause mode without
deactivating the Child Lock by turning
the Programme Selection knob to
On / Off position. When you turn the
Programme Selection knob afterwards,
the programme will resu
C
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary Function
buttons for 3 seconds. The lights on the 1st and
2nd Auxiliary Function buttons will flash while you
keep the buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1st and 2nd auxiliary function
buttons for 3 seconds while any programme is
running. The lights on the 1st and 2nd Auxiliary
Function buttons will flash while you keep the
buttons pressed for 3 seconds.
3.Press Start / Pause button to start the
programme.
5.11 Starting the programme
1.Press Start / Pause button to start the
programme.
2.Programme follow-up light showing the startup
of the programme will turn on.
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On / Off
position when no programme is running,
and select another programme.
When the power is restored after a power
failure or after your machine is unplugged
and plugged in again, the Child Lock will
not be deactivated when the machine
resumes operating.
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights and
indicators will turn on again.
C
C
Washing Machine / User‘s Manual
24 / 36 EN
Operating the product
Changing the speed and temperature settings
for auxiliary functions
5.13 Progress of programme
Progress of a running programme can be followed
from the Programme Follow-up indicator. At
the beginning of every programme step, the
relevant indicator light will turn on and light of the
completed step will turn off.
Depending on the step the programme has
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
be in a step after the running programme step. If
the change is not compatible, relevant lights will
flash for 3 times.
If no change is allowed, the relevant light
will flash for 3 times.
C
Adding or taking out laundry
1.Press the Start / Pause button to switch the
machine to pause mode. The programme follow-
up light of the relevant step during which the
machine was switched into the pause mode will
flash.
If the machine does not pass to the
spinning step, Rinse Hold function might
be active or the automatic unbalanced
C
load detection system might be activated
due to the unbalanced distribution of the
laundry in the machine.
2.Wait until the Loading Door can be opened.
3.Open the Loading Door and add or take out the
laundry.
5.14 Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
cases when the water level is unsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checks the level of the water inside. If the level is
suitable, Loading Door light illuminates steadily
within 1-2 minutes and the loading door can be
opened.
4.Close the Loading Door.
5.Make changes in auxiliary functions,
temperature and speed settings if necessary.
6.Press Start / Pause button to start the machine.
5.16 Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that
the programme has been canceled.
Your machine will end the programme when you
turn the Programme Selection knob; however,
it does not drain the water inside. When you
select and start a new programme, the newly
selected programme will start depending on the
step the previous programme was canceled in.
For example, it may take in additional water or
continue to wash with the water inside.
If the level is unsuitable, Loading Door light turns
off and the loading door cannot be opened. If
you are obliged to open the Loading Door while
the Loading Door light is off, you have to cancel
the current programme; see "Canceling the
programme".
5.15 Changing the selections
after programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the
machine to pause mode while a programme is
running. The light of the step which the machine
is in starts flashing in the Programme Follow-up
indicator to show that the machine has been
switched to the pause mode.
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener again
for the programme you have selected
anew.
C
Also, when the loading door is ready to be opened,
Loading Door light will also illuminate continuously
in addition to the programme step light.
Washing Machine / User‘s Manual
25 / 36 EN
6 Quick User Guide
6.1 Preparing the machine
6.5 Canceling the programme
1.Make sure that the hoses are connected tightly. To cancel the programme, turn the Programme
2.Plug in your machine.
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that
the programme has been canceled.
3.Turn the tap on completely.
4.Place the laundry in the machine.
5.Add detergent and fabric softener.
Your machine will end the programme when you
turn the Programme Selection knob; however,
it does not drain the water inside. When you
select and start a new programme, the newly
selected programme will start depending on the
step the previous programme was canceled in.
For example, it may take in additional water or
continue to wash with the water inside.
6.2 Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the „Programme and
consumption table“ and the temperature table
below.
6.3 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener again
for the programme you have selected
anew.
C
6.4 Starting the programme
1.Press Start / Pause button to start the
programme.
2.Programme follow-up light showing the startup
of the programme will turn on.
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
C
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights and
indicators will turn on again.
Washing Machine / User‘s Manual
26 / 36 EN
7 Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
7.2 Cleaning the loading
door and the drum
Residues of softener, detergent and dirt may
accumulate in your machine in time and may
cause unpleasant odours and washing complaints.
To avoid this, use the Drum Cleaning programme.
If your machine is not featured with Drum
Cleaning programme, use Cottons-90 programme
and select Additional Water or Extra Rinse
auxiliary functions as well. Run the programme
without any laundry in the machine. Before
starting the programme, put max. 100 g of powder
anti-limescale into the main wash detergent
compartment (compartment nr. 2). If the anti-
limescale is in tablet form, put only one tablet into
compartment nr. 2. Dry the inside of the bellow
with a clean piece of cloth after the programme
has come to an end.
7.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every 4-5 washing cycles) as shown below in
order to prevent accumulation of powder detergent
in time.
1.Press the dotted point on the siphon in the
softener compartment and pull towards you until
the compartment is removed from the machine.
If more than normal amount of water and
softener mixture starts to gather in the
softener compartment, the siphon must
Repeat Drum Cleaning process in every
2 months.
C
C
C
be cleaned.
Use an anti-limescale suitable for the
washing machines.
2.Wash the detergent drawer and the siphon with
plenty of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush to
avoid touching of the residues in the drawer with
your skin when cleaning.
After every washing make sure that no foreign
substance is left in the drum.
3.Insert the drawer back into its place after
cleaning and make sure that it is seated well.
If your detergent drawer is the one indicated in the
following figure:
If the holes on the bellow shown in the figure is
blocked, open the holes using a toothpick.
Foreign metal substances will cause
rust stains in the drum. Clean the stains
on the drum surface by using cleaning
agents for stainless steel. Never use steel
wool or wire wool.
C
Lift the rear part of the siphon to remove
it as illustrated. After performing the
above mentioned cleaning procedures,
WARNING: Never use sponge or scrub
materials. These will damage the painted
A and plastic surfaces.
C
replace the siphon back to its seating and
push its front section downwards to make
sure that the locking tab engages.
Washing Machine / User‘s Manual
27 / 36 EN
Maintenance and cleaning
In addition, prior to transporting the machine
(e.g., when moving to another house) and in case
of freezing of the water, water may have to be
drained completely.
7.3 Cleaning the body
and control panel
Wipe the body of the machine with soapy water or
non-corrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the control
panel.
WARNING: Foreign substances left
in the pump filter may damage your
A machine or may cause noise problem.
In order to clean the dirty filter and discharge the
water:
7.4 Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at the
end of each water intake hose where they are
connected to the tap. These filters prevent foreign
substances and dirt in the water to enter the
washing machine. Filters should be cleaned as
they do get dirty.
1.Unplug the machine to cut off the supply power.
WARNING: Temperature of the water
inside the machine may rise up to 90 ºC.
A To avoid burning risk, filter must be
cleaned after the water in the machine
cools down.
2.Open the filter cap.
If the filter cap is composed of two pieces, press
the tab on the filter cap downwards and pull the
piece out towards yourself.
1.Close the taps.
2.Remove the nuts of the water intake hoses to
access the filters on the water intake valves.
Clean them with an appropriate brush. If the
filters are too dirty, take them out by means of
pliers and clean them.
If the filter cap is one piece, pull the cap from both
sides at the top to open.
3.Take out the filters on the flat ends of the water
intake hoses together with the gaskets and
clean thoroughly under running water.
4.Replace the gaskets and filters carefully in their
places and tighten the hose nuts by hand.
7.5 Draining remaining water
and cleaning the pump filter
The filter system in your machine prevents solid
items such as buttons, coins and fabric fibers
clogging the pump impeller during discharge of
washing water. Thus, the water will be discharged
without any problem and the service life of the
pump will extend.
You can remove the filter cover by slightly
pushing downwards with a thin plastic
tipped tool, through the gap above the
filter cover. Do not use metal tipped tools
to remove the cover.
C
If the machine fails to drain water, the pump filter
is clogged. Filter must be cleaned whenever it
is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.
Washing Machine / User‘s Manual
28 / 36 EN
Maintenance and cleaning
3.Some of our products have emergency draining Discharging the water when the product does not
hose and some does not have. Follow the steps have an emergency draining hose:
below to discharge the water.
Discharging the water when the product has an
emergency draining hose:
a. Place a large container in front of the filter to
catch water from the filter.
b. Loosen pump filter (anticlockwise) until water
starts to flow. Fill the flowing water into the
container you have placed in front of the filter.
Always keep a piece of cloth handy to absorb
any spilled water.
c. When the water inside the machine is finished,
take out the filter completely by turning it.
4.Clean any residues inside the filter as well as
fibers, if any, around the pump impeller region.
5.Install the filter.
6.If the filter cap is composed of two pieces, close
the filter cap by pressing on the tab. If it is one
piece, seat the tabs in the lower part into their
places first, and then press the upper part to
close.
a. Pull the emergency draining hose out from its
seat
b. Place a large container at the end of the hose.
Drain the water into the container by pulling
out the plug at the end of the hose. When the
container is full, block the inlet of the hose
by replacing the plug. After the container is
emptied, repeat the above procedure to drain
the water in the machine completely.
c. When draining of water is finished, close the end
by the plug again and fix the hose in its place.
d. Turn the pump filter to take it out.
Washing Machine / User‘s Manual
29 / 36 EN
8 Troubleshooting
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure,
etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous
programme will be canceled. (See “Cancelling the programme”)
Water in the machine.
• Some water might have remained in the product due to the quality control processes in the production. >>> This
is not a failure; water is not harmful to the machine.
There is water leaking from the bottom of the washing machine.
• Likely problems with hoses or the pump filter. >>> Be sure the seals of the water inlet hoses are securely fitted.
Attach the hose to the tap tightly.
• Pump filter might not be closed fully. >>> Make sure that the pump filter is completely closed.
Machine does not fill with water.
• Tap is turned off. >>> Open the inlet water taps fully.
• Water inlet hose is bent. >>> Flatten the water inlet hose.
• Water inlet filter is clogged. >>> Clean the water inlet filter.
• The loading door is ajar. >>> Close the Loading Door.
Machine does not drain water.
• Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.
• Pump filter is clogged. >>> Clean the pump filter.
Machine vibrates or makes noise.
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump filter.
• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
• Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the
load by hand to balance it homogenously in the machine.
• Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.
Machine stopped shortly after the programme started.
• Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage
restores to the normal level.
Machine directly discharges the water it takes in.
• Draining hose might not be at adequate height. >>> Connect the water draining hose as described in the
operation manual.
No water can be seen in the machine during washing.
• The water level is not visible from outside of the washing machine. This is not a failure.
Loading door cannot be opened.
• Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or
Spin programme.
• Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
• Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an
end. >>> Wait for a couple of minutes for deactivation of the door lock.
Washing Machine / User‘s Manual
30 / 36 EN
Troubleshooting
Washing takes longer time than specified in the manual.(*)
• Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing
quality due to the decreased amount of water. Therefore, the washing time extends.
• Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is
low.
• Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also,
washing time can be lengthened to avoid poor washing results.
• Number of rinses and/or amount of rinse water might have increased. >>> Machine increases the amount of
rinse water when good rinsing is needed and adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to
too much detergent usage. >>> Use recommended amount of detergent.
Programme time does not countdown. (On models with display)(*)
• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate
amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due
to lack of water. Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the
selected temperature.
• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due
to the unbalanced distribution of the laundry in the drum.
Programme time does not countdown.(*)
• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system
might be activated due to the unbalanced distribution of the laundry in the drum.
Machine does not switch to spinning step.(*)
• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system
might be activated due to the unbalanced distribution of the laundry in the drum.
• The machine will not spin if water is not drained completely. >>> Check the filter and the draining hose.
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to
too much detergent usage. >>> Use recommended amount of detergent.
Washing performance is poor: Laundry turns gray.(**)
• Insufficient amount of detergent was used over a long period of time. >>> Use the recommended amount of
detergent appropriate for water hardness and the laundry.
• Washing was made at low temperatures for a long time over a long period of time. >>> Select the proper
temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>> Using insufficient amount of detergent with
hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate
graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the
laundry.
• Too much detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness
and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened.(**)
• Insufficient amount of detergent is used. >>> Use recommended amount of detergent appropriate for the
laundry.
• Excessive laundry was loaded in. >>> Do not load the machine in excess. Load with amounts recommended in
the "Programme and consumption table".
• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the
laundry to be washed.
• Wrong type of detergent is used. >>> Use original detergent appropriate for the machine.
• Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment. Do not mix the
bleaching agent and the detergent with each other.
Washing Machine / User‘s Manual
31 / 36 EN
Troubleshooting
Washing performance is poor: Oily stains appeared on the laundry.
• Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2.
Washing performance is poor: Clothes smell unpleasantly.(**)
• Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/
or in short programmes. >>> Leave the detergent drawer as well as the loading door of the machine ajar after
each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.
Colour of the clothes faded.(**)
• Excessive laundry was loaded in. >>> Do not load the machine in excess.
• Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose
them to excessive temperatures.
• A higher temperature is selected. >>> Select the proper programme and temperature according to the type and
soiling degree of the laundry.
It does not rinse well.
• The amount, brand and storage conditions of the detergent used are inappropriate. >>> Use a detergent
appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of
humidity and do not expose them to excessive temperatures.
• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent
in the correct compartment.
• Pump filter is clogged. >>> Check the filter.
• Drain hose is folded. >>> Check the drain hose.
Laundry became stiff after washing.(**)
• Insufficient amount of detergent is used. >>> Using insufficient amount of detergent for the water hardness can
cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.
• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent
in the correct compartment.
• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the
dispenser with hot water.
Laundry does not smell like the softener.(**)
• Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean
the dispenser with hot water. Put the detergent in the correct compartment.
• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the
dispenser with hot water.
Detergent residue in the detergent drawer.(**)
• Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent.
• Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose
them to excessive temperatures.
• Water pressure is low. >>> Check the water pressure.
• The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent
compartment are blocked. >>> Check the holes and clean if they are clogged.
• There is a problem with the detergent drawer valves. >>> Call the Authorized Service Agent.
• Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the
dispenser with hot water.
Washing Machine / User‘s Manual
32 / 36 EN
Troubleshooting
There is detergent left on the laundry. (**)
• Excessive laundry was loaded in. >>> Do not load the machine in excess.
• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the
laundry to be washed.
• Wrong detergent was used. >>> Select the proper detergent for the laundry to be washed.
Too much foam forms in the machine.(**)
• Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing
machine.
• Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.
• Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store
in excessively hot places.
• Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of
detergent for this type of item.
• Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment.
• Softener is being taken early. >>> There may be problem in the valves or in the detergent dispenser. Call the
Authorized Service Agent.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash
compartment of the detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme
and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the
amount of detergent.
Laundry remains wet at the end of the programme (*)
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to
too much detergent usage. >>> Use recommended amount of detergent.
*
Machine does not switch to spinning step when the laundry is not evenly distributed in the drum
to prevent any damage to the machine and to its surrounding environment. Laundry should be
rearranged and re-spun.
** Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2.
WARNING: If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product
A yourself.
Washing Machine / User‘s Manual
33 / 36 EN
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 1061/201
Supplier name or trademark
Beko
Beko
Beko
Model name
WMB51221S
WMB51221W
WMB51021W
Rated capacity (kg)
5
5
5
Energy efficiency class (1)
Annual Energy Consumption (kWh) (2)
A+
158
A+
158
A+
158
Energy consumption of the standard 60°C cotton
programme at full load (kWh)
Energy consumption of the standard 60°C cotton
programme at partial load (kWh)
Energy consumption of the standard 40°C cotton
programme at partial load (kWh)
0.743
0.687
0.606
0.743
0.687
0.606
0.743
0.687
0.606
Power consumption in ‘off-mode’ (W)
Power consumption in ‘left-on mode’ (W)
Annual Water Consumption (l) (3)
Spin-drying efficiency class (4)
0.250
1.350
7260
B
0.250
0.250
1.350
7260
C
1.350
7260
B
Maximum spin speed (rpm)
1200
53
1200
53
1000
62
Remaining moisture Content (%)
Standard cotton programme(5)
Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton
programme at full load (min)
Programme time of the standard 60°C cotton
programme at partial load (min)
159
129
159
129
159
129
Programme time of the standard 40°C cotton
programme at partial load (min)
129
N/A
129
N/A
129
N/A
Duration of the left-on mode (min)
Airborne acoustical noise emissions washing/
spinning (dB)
58/74
No
58/74
No
59/72
No
Built-in
(1) Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)
(2) Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial
load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(3) Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial
load. Actual water consumption will depend on how the appliance is used.
(4) Scale from A (Highest Efficiency) to G (Lowest Efficiency)
(5) “Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes
to which the information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton
laundry and that they are the most efficient programmes in terms of combined energy and water consumption.
Washing Machine / User‘s Manual
34 / 36 EN
Service
Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it
should the product require attention under guarantee.
You should also complete the details below; it will help us assist you when requesting service. (The
model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label
affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas &
0845 600 4903
0845 600 4902
0845 600 4905
Dual Fuel Cookers
Washing Machines &
Dishwashers
0845 600 4906
Republic of Ireland
All Refrigeration, 01 862 3411
All Cookers
Washing Machines & Dishwashers
Before requesting service please check the trouble-shooting guide in the Operating Instructions as a
charge may be levied where no fault is found even though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained within the
extended guarantee agreement document. Otherwise please call the appropriate number above where
service can be obtained at a charge.
Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:service@beko.co.uk
Guarantee
Your new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the
date of the original purchase.
What is covered?
• Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
• The cost of functional replacement parts, but excluding consumable items.
• The labour costs of a Beko approved repairer to carry out the repair.
What is not covered?
• Transit, delivery or accidental damage or misuse and abuse.
• Cabinet or appearance parts, including knobs, flaps, handles or container lids.
• Accessories or consumable items including but not limited to, ice trays, scrapers, cutlery baskets,
filters and light bulbs.
• Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the
requirements contained in the user instruction book.
• Repairs to products used on commercial or non-residential household premises.
• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is often included within your
household contents insurance policy, or may be available separately from your retailer).
Important notes.
• Your Beko product is designed and built for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or non-residential
domestic household premises.
• The product must be correctly installed, located and operated in accordance with the instructions
contained in the User Instructions Booklet provided.
• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all
Washing Machines, Dishwashers and Electric Cookers
• Gas Cookers must only be installed by a CORGI (or BORD GAIS) registered Gas Installer.
• The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland.
• The guarantee is applicable only to new products and is not transferable if the product is resold.
• Beko disclaims any liability for incidental or consequential damages.
• The guarantee does not in anyway diminish your statutory or legal rights.
Should you experience any difficulty in obtaining service please contact the Beko Customer Help-Line.
Tel: 0845 600 4911
e-mail:service@beko.co.uk
www.beko.com
|
Bel Canto Design Stereo Amplifier PHONO 1 User Manual
Blackberry Cell Phone 5810 User Manual
Blackberry Cell Phone 3980228 User Manual
Bosch Power Tools Router 1613AEVS User Manual
Brocade Communications Systems Switch 53 1001762 01 User Manual
Canon Thermostat EOS 450D User Manual
CDA Ventilation Hood CPXI9 User Manual
Chamberlain Home Security System 935CB User Manual
Char Broil Charcoal Grill 463270309 User Manual
Chicago Electric Sander 93431 User Manual